Re: Clutch master cylinder rebuild kit

["Jim Blair" <carnuck@xxxxxxxxxxx>]

A: Is the size of the bore 3/4" or ?


From: Marty Bricker <mbrickerusn@xxxxxxxxx>
Subject: Clutch master cylinder rebuild kit
To: northtexasamc@xxxxxxxxxxxxxxx, AMC List <mail@xxxxxxxxxxxx>

I have an 83 SX/4 with the 5spd.  My clutch master
cylinder started leaking inside the car.  I removed
the cylinder and ordered a new one from Autozone...not
even close to the correct one.  Went to
Partsamerica.com and found the correct one for $99. 
By this time I had the leaking cylinder removed and
decided to take it apart.  The cylinder bore is not
pitted so I decided to go with a rebuild kit.  One kit
from Bendix only has rubber seals, anoter had a
complete piston assy and the third had no picture.  I
went for the one with the complete piston assy and the
piston is too small for the bore (going back to the
website it says 11/16 bore but the others don't list a
bore size so I figured it was the same for all of
them).  Long story to ask if anyone has a number for a
correct rebuild kit.  Thanks.

Marty