Re: Intake mounted water temp valve needed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Intake mounted water temp valve needed



If you just can't find one, another option would be to install a ball valve in 
the heater hose.  I've put these in a couple of old cars.  You just open the 
valve in the winter, and close the valve in the summer.  It looks something 
like this:

http://ace.imageg.net/graphics/product_images/pACE-964257dt.jpg

You turn it a quarter turn to open or close the valve.

Todd

On Friday 11 March 2005 23:31, Joe wrote:
> Anyone know where to get a intake manifold mounted
> heater temp water valve? I need one that threads into
> the right rear corner of a V8 intake. It's "cable
> controlled"...NOT vacuum. I need it for my 1972 V8
> Gremlin conversion. My Gremlin is a factory 232 with
> AC. Heater valve mounts to the firewall. I think i can
> use the intake mounted one. I have a RUSTY one on a
> 70-72 factory 4bbl intake i've been pondering. My AC
> works...why not keep the controls working? Never had a
> hot rod with functioning AC! I'm gettin old...i
> know!!! Thanks alot,joe

>





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated