Re: Window Lift Motor Installation - Got Power? ** ADDITIONAL INFO**

[Tom Jennings <tomj@xxxxxxx>]

On Mon, 7 Mar 2005, Greg Taylor wrote:

> door, I had power to BOTH wires simultaneously.  This was with the switch
> flipped either up or down ... power to both wires.  I'm assuming that since
> these are reverse polarity motors that I should only have power to one wire at
> a time, dependant on the direction of flip switch.

That's the key...

I don't have the TSM, but here's the idea:

if you call the two wires off the motor "A" and "B" (since I don't know
the colors) the switch wiring does this:

for UP:

A goes to BATTERY
B goes to GROUND

for DOWN:

A goes to GROUND
B goes to BATTERY

Hope that hint helps...