OK, so I have removed the vacuum connection to the front axle on my Eagle (82 SX4)... secured the axle shifter with a large hose clamp and lock tight. (of course, after I did all this I found the break in the vacuum hose over the tranny!) So, I want to run the Dash Switch directly to the TC shift motor. My question is, how do you hook to the vacuum source that will shift the motor? From the switch there are red/green/yellow and into the TC there are red/green/with a split yellow/white that splices with the red. There is a black vacuum hose that supplies that vacuum near the Axle. Anyone done this yet? Thanks and have a great, Jesse __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web http://birthday.yahoo.com/netrospective/