Thank you Randy! Now I just have to determine whether its a 4300 or 4350. I'm clueless about the choke part number and I'm guessing here, but I'm thinking the carb is from a 1974 model based on the first digit of those numbers. Thank you for the info on the intake. I learned something new today. Thank you for your help, Ralph Bade -----Original Message----- From: Guynn [mailto:amx69@xxxxxxxxxx] Sent: Thursday, February 24, 2005 8:13 AM To: rbade@xxxxxxxxxxxxxxxxx; mail@xxxxxxxxxxxx Subject: I need Carburetor Help for rebuild??? Ralph, It sure sounds like you have the Motorcraft carb alright. In some cases there will be no listing at all for the AMC model carb kit. Don't give up. All the common rebuild gaskets is the same as the Ford models which usually are listed. As for your intake manifold saying 360. That is because it is an OFFENHAUSER 360 intake. It is the model of the intake, not for a 360 engine size. Just like Edelbrock named their latest intake Air Gap, Offenhauser designates this as their 360 manifold.This also refers to the design of the intake.The offy 360 intake fits on any AMC V8 from 290 thru 401. If/when you get strange stares at the auto parts about an AMC motorcraft carb, try to get the counter guy to look at Ford models and you can get enough parts to go thru the carb. Good Luck, Randy Guynn -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 2/22/2005