Re: Craftsman Torque Wrenches, Others may be different

[<mail@xxxxxxxxxxxx>]

O.K. I went back and noticed the bottom of the story on Torque wrenches lists a Co. here in West Virginia that does Torque wrench repair and calibration. Here is the link for those who don't want to read the story!

http://www.anglerepair.com/


Mark Price
WARNING!There is a new VIRUS called "WORK". 
If you receive WORK from your colleagues, your boss, via e-mail, or from 
anyone else, do not touch it under any circumstances. This virus wipes out 
your private life completely. If you should happen to come in  contact with 
this virus, take two friends and go straight to the nearest bar. Order 
drinks immediately and after three 
rounds, you will find that WORK has been completely removed from your brain. 
Forward this virus warning immediately to at least five friends. 
Should you realise you do not have five friends, this means you are already 
infected by this virus and WORK already controls your 
life. If this is the case, go to the bar and stay until you make at least 
five friends. Then retry. 

I think I have five friends, but am not entirely positive so I'm headed for 
the bar anyway.....it never hurts to be safe. 





---------- Original Message ----------------------------------
From: <mail@xxxxxxxxxxxx>
Reply-To: mail-From-mprice-westco.net@xxxxxxxxxxxx
Date:  Fri, 11 Feb 2005 12:36:57 -0500

>HMMM, Instructions? 
>Don't they print them on paper?
>I saw a set once! I was confused by the whole concept!
>
>Seriously, Thanks.
>I just assumed that since the Snap On wrenches speced the zero setting that all would.
>I guess that was rather short sighted of me.
>You learn something new every day.
>I'm now wondering if I read the instructions on my Snap On wrenches? I bought them in 1986, so I really don't remember if I read that they should be backed off to zero or if the dealer told me to do it.
>Maybe I've been wrong all these years!
>
>Thanks again for the tip!
>Mark Price
>
>
>
>
>---------- Original Message ----------------------------------
>From: Guynn <amx69@xxxxxxxxxx>
>Reply-To: mail-From-mprice-westco.net@xxxxxxxxxxxx
>Date:  Fri, 11 Feb 2005 10:31:35 -0600
>
>>Craftsman states their Torque Wrenches should be storred with 20 # on 
>>them, not re-set to Zero.
>>
>>Also, Craftsman torque wrenches ARE NOT gaurenteed for LIfe as many 
>>Craftsman tools are.
>>
>>If you will READ the booklet, and instructions that comes with YOUR own 
>>wrench, then you will know what THAT manufacturers recomendations for 
>>storage really are.I know we MEN have a very bad reputation fopr 
>>discarding instructions, but if you will just read yours before you toss 
>>them, maybe you will learn somethiung rather than what you Thought. I 
>>know 100% for certain that if you read the info supplied with Craftsman 
>>Torque Wrenches you will learn it is guarenteed for ONE year only.And, 
>>on Craftsman you will learn they want ]]click type]] Torque Wrenches 
>>stored with 20 # tension on them.
>>
>>Regards,
>>
>>Randy Guynn
>>
>>
>>
>>
> 
>
> 
>
>
>
> 
>
>                   
>
>
>
>