Re: STROKER engines

John, all the GEN-2 and GEN-3 cranks and rods will interchange. Keep the crank with its respective rods and pistons and you can put any combo together. If you use a 390 or 401 crank in one of the smaller engines you'll have to check clearance between the bottoms of the bores and crank counter weights, most need notching. Other than that get the bores and strokes and do the math! Not trying to be a smart ass here. Very few people have a reson to use odd combos. 360s are easy enough to come by, and most prefer the cubes to building a 304 block with 360 crank. The 390 and 401 cranks are harder to come by, so it gets expensive to use one of those in a 360 or 343 block. I can see using a 360 crank in a 304 for a turbo or blown engine, maybe, as the thicker cylinder walls will make the block a good bit stronger, and the 360 crank will give a few more cubes.


On January 26, 2005  wrote:

> Not a single post, come on guys, someone has to know something.
> 
> -----Original Message-----
> From: mail-return@xxxxxxxxxxxx [mailto:mail-return@xxxxxxxxxxxx]
> Sent: Monday, January 24, 2005 12:06 PM
> Subject: STROKER engines show your AMC intellect!!
> 
> 
> I managed to misspell stroker and use the word intellect in the same
> sentence, gotta love Mondays.
> 
> ~John
> 
> -----Original Message-----
> From: mail-return@xxxxxxxxxxxx [mailto:mail-return@xxxxxxxxxxxx]
> Sent: Monday, January 24, 2005 11:25 AM
> Subject: Stoker engines show your AMC intellect!!
> 
> 
> Speaking of stroker combinations (always fun I say) who knows what parts can
> go with what and make stroker combinations. I've never seen a put this with
> that get this list (A+M=X??) anywhere for AMC engines. Who here knows this
> info?? 290 crank in a 401 anyone?? I'm very excited to see what's been or
> can be done.
> 
> ~John
> John.Widiker@xxxxxxx
> 
> -----Original Message-----
> From: mail-return@xxxxxxxxxxxx [mailto:mail-return@xxxxxxxxxxxx]
> Sent: Friday, January 21, 2005 5:56 PM
> Subject: 360 Talk
> 
> 
> 
> 
> To: mail@xxxxxxxxxxxx
> Subject: 360 Talk
> Message-ID:
> <OF05D976A5.9FC3C3C9- ON86256F90.0049674E@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > From: "Nick P Alfano" <nick.alfano@xxxxxxxxxx> Date: Fri,
> 21 Jan
> 2005 08:17:13 -0600
> 
> Brien,
> 
> I have posted many times about these.  They are a 5.885 length
> bushed
> for floating pins.  They are good for 8,00 rpm and 800 hp which is
> far
> more than a cast rod would go and even more than our stock
> forged 401
> are good for.  These would be really nice to add to a 390 or 401
> crank
> in a 360 block.  I am working on a 360 stroker combination that
> will
> be somewhere in the 391-396 ci range.
> 
> Now for the bad news, Scat screwed this project up royally and
> now
> after promising to make it right price wise, is going back on their word.
> They were suppose to ship all of them at once but only sent
> a
> few sets at a time.  Originally there were going to be 4340 I-beam rods for
> pressed pins and be finished last June.  After months of delays, they then
> said they got H-beam cores by mistake but
> would
> honor the agreement.  After waiting even longer for them to finish
> the
> rods, they bushed every set instead of making them for pressed
> pins
> with only 10 sets bushed for floaters.  Since they finished them
> and
> sent out the first few sets , they decided they wanted to make up
> the
> money for their mistakes so they said they would not ship the rest until
> they renegotiated the price.  What does that mean to you?
> Well,
> if you were one of the guys who prepaid me for sets, you got a screaming
> deal.  Those who bought them up to about a couple
> weeks ago,
> got them around the price you saw which was still a great deal on
> that
> rod set up.  The price now is upwards of $450 a set.
> 
> Nick Alfano
> 
> 
> =========================
> 
> 
> Ah Huh,  well $450.00 is too rich for my blood - especially
> as they're on eBay for $399.00
> 
> Too bad SCAT is not covering their word -
> but for that money - I'll find a 401 crank & rods for the 360 and still have
> cash left over.
> 
> 
>              Brien.
>          NEW YORK
>    eagle registry #501
> eagle kammback registry
> 
> 
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/2005
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> .


=============================================================
Posted by wixList Archiver -- http://www.amxfiles.com/wixlist