Temperature Sensor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Temperature Sensor



Thanks, Its and RV trick to add a Temperature Gage to compensate the Hot 
Idiot Light on the dash, also know a few guys that have used the same Ideal 
on the Transmission oil cooling line but used a 3/4 in. copper tee with the 
bulb in the tee so it did not restrict the flow.  they didn't won't to drop 
the pan and have some one weld a threaded bulb for the sensor.   By the way 
thanks for not pointing my sailing problem........... My wife says my RV 
looks like an airplane with all the temperature, oil, and battery gauges.

Date: Thu, 20 Jan 2005 09:55:23 -0500
Message-Id: <200501200955.AA34406552@xxxxxxxxxxxxxxx>
From: <mail@xxxxxxxxxxxx>
To: mail@xxxxxxxxxxxx
Subject: Re: Elec Fan Radiator Sensor.

I hadn't thought of Copper tube.
I may be able to find a piece here at work as there was some large pieces 
left after the last renovation.
I think I may try mounting a wet sensor in the return hose. As long as I 
keep it down around or below the 210 degree range it should be fine. So I'm 
thinking that if I pick up one of the G.M aftermarket wet sensors that trip 
at 195-200 range they will kick on when the returning coolant gets to the 
point that it needs the fan on.
I know 87-90 XJ's had the sensor in the radiator tank close to the return 
hose, IIRC!
  If I had thought of it I would have had a bung added to the lower radiator 
tank, but it is in and mounted and I fooled with it all last weekend to get 
it  how it needed to be with the G.M electric fan on in. I'm not pulling it 
out again!
Mark Price



---------- Original Message ----------------------------------
From:
Reply-To: mail-From-mprice-westco.net@xxxxxxxxxxxx
Date:  Wed, 19 Jan 2005 22:57:35 -0500 (EST)

>One thing I have see if you don't won't to place a hole in the radiator is
>to cut the top hose and place a piece of copper  tubing with a
>correctly-threaded bung and sensor in the middle of the hose.  Check with
>one of your local plumbing contractors for a short 6 to 12" piece of copper
>the size of your upper hose, they may give you a short piece they have
>laying around and might solder it for you, otherwise you will end up buying
>a 10 or 20 foot section from a hole sail house.  That's if you need a wet
>sensor, they have clamp on, type also.
>
>
>Message-ID:
><0D52F50748437D4D97A7A2B169CAEEE5061A762F@xxxxxxxxxxxxxxxxxxxxxxxxx>
>From: "Graham, George W (GE Energy)" <george.graham@xxxxxxxxx>
>To: mail@xxxxxxxxxxxx
>Subject:   RE: Rad fan sensor ideas
>Date: Wed, 19 Jan 2005 16:54:44 -0500 






Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated