Re: Changing 72 SST 360 Distrbutor - MSD
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Changing 72 SST 360 Distrbutor - MSD



Steve,

I don't think the ballast resiistor is suppossed to be used with an MSD box. The thing is suppossed to have peak voltage available.

Get a set of instructions for a MSD 6 and you will see that a DIODE is called for to stop the run on problem. Or, you can simply snip the wire feeding your Dash light for ALT. and you will stop hsaving run on.

The light comes on, this back feeds the MSD and the car runs just like the key was in it and it was running. Add a Diode as MSD says, or snip the wire and you can toss the ballast resistor.

In case you did not know, there is a book available thru MSD with every wire diagram for all their products. This is a great book to have if you are messing with Hi.Po cars and MSDs. It covers every type distributor hook up as well.

Regards,
Randy Guynn

Regards,

Randy Guynn




Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated