There is a page at www.groups.msn.com/amcsforever2 that you can make a folder and post pics of your car to. The page was at least partially made so people here would have a free place to share pics. On January 2, 2005 jamie smith wrote: > Matt, > > Yep, I had already figured the master cylinder and wheel cylinders would be bad even before I tried to move the car since it has been sitting so long. I had to replace all 4 wheel cylinders and the master cylinder on my American so I just automatically figured I would do the same to the Classic. The master went out on my American this past summer, causing me to back into a coworkers truck, and that is something I don't want to experience again. As for the switch fitting the master cylinder, I found a fix for that on my American. The only master cylinder I could find that would fit had too small of a hole for the switch so I ended up putting a few fittings on one of the brake line ports (including a T) and put the switch on that line. It has been about 6 months and it still seems to be working. I figured if it comes to that I will do the same to the Classic. > > No, it is not a V-8, it has the 232. I apologize, I should have mentioned that in my original post. I appreciate all the suggestions and ideas, I will be printing all this out and putting it in a folder so I have the info when I start collecting parts to fix up this car. Thanks. > > Jamie > > On January 2, 2005 Matt Haas wrote: > > > Jamie, > > > > Besides the wheel cylinders, the master cylinder may be bad as well. When > > the master cylinder went bad in my American this summer, I had no back > > brakes and barley had fronts. > > > > As far as the conversion to disk brakes goes, you've already gotten a list > > of potential donor vehicles but I'd go ahead and use a disk brake master > > cylinder. At least for 1967 & 8, AMC only used power brakes with front > > disks so you'd have to buy a power booster to use a factory set up but I'd > > bet you'll be able to find a non-power disk brake master cylinder that will > > work. Also, if you go with a factory set up, you'll probably want to use a > > 1967 or older cylinder since it will take you current brake light switch. > > > > If the car's a V8, you'll have a model 20 axle in it. There's a rear disk > > brake kit you can buy for model 20's at > > http://www.classicone.com/wsc/catalog/amc/amc_per1.htm. > > > > Matt > > > > At 11:29 PM 1/1/2005 -0500, you wrote: > > > > >I finally brought home my 66 classic (I bought it from my boss about a > > >year and a half ago and it has been sitting at work since then. he is > > >buying another trailer and told me I needed to get it moved). My boss and > > >I had it started and running about the time I bought it but my dad and I > > >couldn't get it to run without spraying starting fluid in the carb. We > > >ended up towing it home and discovered the front brakes are all that works > > >and they barely work. I figured that from the amount of time it has been > > >sitting I would have to do brakes. I have been figuring on doing master > > >cylinder, shoes, and wheel cylinders (all things I had to do to the > > >american) and probably lines. My question is, how hard would it be to > > >convert to disk brakes as long as I am rebuilding it? What would be a good > > >donor for the parts and what parts would I need? can I only convert the > > >front to disk or can the back be converted too? or is there any need to > > >convert the back if I am converting the front? Thanks! > > > in advance. > > > > > >Jamie Smith > > >Spokane, Wa. > > >oconner51@xxxxxxxxxxx > > >1966 Rambler American 220 Station Wagon > > >1966 Rambler Classic 770 2 Door Hardtop > > >1966 Jeep Wagoneer > > > > > >============================================================= > > >Posted by wixList Archiver -- http://www.amxfiles.com/wixlist > > > > mhaas@xxxxxxx > > Cincinnati, OH > > http://www.mattsoldcars.com > > 1966 Rambler Rebel > > 1968 Rambler American sedan > > =============================================================== > > According to a February survey of Internet holdouts released by > > UCLA's Center for Communication Policy, people cite > > not having a computer as the No. 1 reason they won't go online. > > > > > > > > > > . > > > ============================================================= > Posted by wixList Archiver -- http://www.amxfiles.com/wixlist > > > > > . ============================================================= Posted by wixList Archiver -- http://www.amxfiles.com/wixlist