Rusted Rear Brake Drum - Update

[Todd Tomason <jayscore@xxxxxxxxxxxxx>]

I got the drum off this afternoon.  I soaked it with PB Blaster last night.  I 
tried the figure 8 method, but that didn't seem to break it loose.  I 
hammered a bit between the lug nuts, but not too hard.  I didn't want to risk 
damaging it.  I finally dug out the slide hammer and worked my way around the 
edge a few times.  This finally broke it loose.  I also noticed that the hub 
was pretty well coated with PB Blaster, so that had soaked in more than I 
thought.  

It's off.  Thanks for all the suggestions.


Todd