RE:Wrist pins for AMC
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE:Wrist pins for AMC
- From: Guynn <amx69@xxxxxxxxxx>
- Date: Wed, 29 Dec 2004 04:39:06 -0600
Jim,
I can get the stock pins. However the machine shop will need to machine
them to the correct length for locking devices. No one that makes pins
will have a clue as to what type, or how many pin locking devices a
person is going to use.
That I am aware of no one makes a piston for this application that is
machined for ''floating pins''. So, the ONLY piston for the V8 that is
NHRA accepted is the lone cast piece from Federal Mogal.And as I said it
is not machined for floating pins.
I can fix you up with the raw material, i.e. stock wristpins, but the
machine shop will need to make them fit and work as floaters.
Regards,
Randy Guynn
Back to the Home of the AMC Gremlin