A: Somehow I missed the video the first time I looked at it (I was just a LITTLE tired. I have a torn rotator cuff in my right shoulder and 48 hours before I had my MRI and 48 hours after I couldn't take any pain meds due to the stuff they injected, so I overdid them a bit yesterday after work) It looks like either the wires are incorrectly aligned (1-5-3-6-2-4 in the rotation of the rotor as the motor spins) or you are 1 notch retarded (the dist that is). Send a pic of the dist and I'll tell you roughly where you should turn it to make it catch and run unless you know which way is advance. What happens is the motor starts spinning to catch, but the spark fires so far after TDC that it actually ignites as the piston is coming up on the exhaust stroke. From: "Brian Hagen" <brian.hagen@xxxxxxxxxxx> To: mail@xxxxxxxxxxxx Subject: Re: 65 Rambler - Gasoline Geyser - Help?! Date: Sun, 21 Nov 2004 21:48:57 -0500 Dang. Thats too much! I know its not the condensor since Ive removed that with the Pertronix Elec ignition. The other stuff... i dont even know how to figure out if thats it!