Re: Distributor Troubles - 65 Rambler
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Distributor Troubles - 65 Rambler
- From: "Brian Hagen" <brian.hagen@xxxxxxxxxxx>
- Date: Mon, 15 Nov 2004 19:39:23 -0500
Ok...but how come I cant move it again? If i try to turn the "key" at the
top of the distributor it doesnt move with my power... so how did wigglin it
out do it?
Just askin...
----- Original Message -----
From: "Ken Ames" <amesk@xxxxxxxxxxxxxxxxxxxxxx>
To: <mail@xxxxxxxxxxxx>
Sent: Monday, November 15, 2004 7:48 PM
Subject: Re: Distributor Troubles - 65 Rambler
As below, most likley the oil pump moved while you were taking the old one
out
or while you were putting the new one in.
Ken Ames
Quoting Jonathan Jusczyk <jusczj@xxxxxxx>:
When putting in a distributor, two things have to line up. First, the
worm gears must mesh together, and secondly the oil pump drive (the wide
flat section at the bottom) must line up. So, assuming nothing moves,
the distributor can go in at 0 deg or 180 deg, as this will make the oil
pump drive line up.
Back to the Home of the AMC Gremlin