Are they trying to fit model 15 axles (2.73) into a model 20 (3.54) housing? Ken Ames Quoting "" <ben70amx@xxxxxxxxx>: > HELLO9 GUYS, IF ANY OF YOU CAN HELP jOHN OR HIS ASSOCIATES, PLEASE DO. > MY THANKS IN ADVANCE, > BEN FRANKLIN > > All, > > It is rare that I send a mass email, like this but collectively you > represent the smartest group of AMC folks that I know. Ed and Trey Forrest > race a Spirit in SCCA's ITA class. They are doing exceptionally well but > have run into a problem swapping rear axles as described below. If you have > any suggestions on what might be wrong please respond to the three email > adresses in the send to list. > > Thanks > John Young > ________________________________________________________________ > >From Ed and Trey Forrest: > > We are trying to switch the axles from a rear end we ran...2.73 with 10" > brakes. > > The axles will not fit into the 3.54 carrier. Both have 27 splines. The > only difference we see is that on the axles we were running with 8" brakes > there is a slight bevel before the splines. On the other 2.73 axles there is > no bevel. > > Why won't these fit? There is no end play in the axles we are trying to > install...just can't get them to mate into the housing. > > Is there a phone number we can call? > > > > ============================================================= > Posted by wixList Archiver -- http://www.amxfiles.com/wixlist > > > . > > > ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/