FYI New upgrade coming for BHJ balancers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

FYI New upgrade coming for BHJ balancers



BHJ is now going to modify the timing/hash marks on their AMC balancers. They already provide quiet a bit of extra mark[60 degrees worth] for timing, and also one mark at every 90 degrees , [comes in handy when adjusting valves] but the marks provided have been too near the rear of the balancers to be read. They are going to move things to get the marks out to the outer edge of the units.

In most cases today, guys are using an advance dial type timing light aand so the extra 60 degree marks are never used, only TDC. However the guy that does not own an advance type light could not set his timing with much accuracy. Moving the marks will allow anyone to read them with any type of timing light.

Also they are looking into doing the 240 degree offset balancer as most 360 engines use. I believe this will come into good use once the new steel SCAT rods for the 360s are in use.

Regards,

Randy Guynn




Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated