On September 23, 2004 andrew hay wrote: > i believe it wasn't until the '60s that an acceptable cast iron crank > was even possible. i'll bet gm's 'armasteel' first appears around > then. i wouldn't be surprised if it didn't come down to a new process > for volume casting high-strength iron. > ArmaSteel was developed in the 1930s. The process was very instrumental in rapid development of military equipment during WWII. The ArmaSteel parts were 150% stronger and lasted twice as long as common grey cast iron. ============================================================= Posted by wixList Archiver -- http://www.amxfiles.com/wixlist