 
Re: [AMC-list] Aluminum radiator fit
     
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [AMC-list] Aluminum radiator fit
- From: "Dan Ritzinger" <danritz@xxxxxxxxxxxxxxx>
- Date: Sat, 13 Apr 2013 18:34:36 -0500
The 40-over 401 in my '69 Javelin ran hot from the get-go.  I can't tell you 
how many radiators I've had in and out of it trying to get it to run cooler. 
The ultimate solution:
- Taylor thermostat
- High-flow aluminum water pump
- Correct fan shroud
- 4-row brass radiator that I purchased from "Extreme Radiator"
Along the way I tried variations of aluminum radiators.  As I recall, one 
was even something of a custom job sold by someone associated with NASCAR. 
All of the aluminum that I tried - whether 2-row or 3-row - cooled pretty 
much identically to my original factory 3-row brass.  Not necessarily a bad 
thing - the aluminum ones apparently worked as well as the factory one. 
But, in my situation, the 4-row brass was the ultimate solution.  The other 
cooling system pieces were in place before I swapped in/out the last several 
radiators, so the 4-row was definitely the final determining factor.
In attempting to now check out the Extreme Radiator website - it's gone, I 
can't find anything on the web except old forum posts referencing them. 
But... seller radiator_expert is selling a similar piece on eBay right now; 
do a search on item no. 260752774940.  I can't tell you anything about that 
specific piece.  The price seems pretty reasonable:  $300 + shipping.
Again, the aluminum ones worked fine, but I can't say enough about this 
4-row brass.  It's the only radiator that I had in the car that would 
quickly cool the motor if it had warmed while doing a long-term idle - 
simply hold the accelerator down for a few moments, and watch the heat gauge 
drop.
FWIW...
Dan
-----Original Message----- 
From: tbmccall
Sent: Saturday, April 13, 2013 5:45 PM
To: amc-list@xxxxxxxxxxxxxxxxx
Subject: [AMC-list] Aluminum radiator fit
The radiator in my 73 Matador is done. It needs new welds, and new cores. I 
saw aluminum radiators on ebay and thought this would be better money spent 
rather than a rebuild. Anybody gone this route? Was it a direct fit, or did 
you have to modify anything?
Sent from my Samsung Epic™ 4G Touch
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20130413/2c95c5ea/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com 
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
 Back to the Home of the AMC Gremlin
 Back to the Home of the AMC Gremlin