 
[Amc-list] Weber 32/36 DGEV Issue
     
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Amc-list] Weber 32/36 DGEV Issue
- From: Todd Tomason <jayscore@xxxxxxxxxxxxx>
- Date: Mon, 17 Nov 2008 07:07:13 -0600
I've had one of the 32/36 DGEV carbs on the 258 in my Spirit for a couple of 
years now.  The instructions say that the fuel pressure should only be 3.5 
pounds and they recommend using a fuel pressure regulator.  I've also seen a 
couple of forums that talk about how much better the carb ran with a 
regulator.  I finally got around to buying one and installing it this 
weekend.  
It seemed to run pretty good, until I went up a hill.  Trying to pull a hill 
the whole car would start to buck.  It made you thing of someone trying to 
drive a manual transmission the first time.  It died two or three times 
getting up that hill.  I got back home, took the regulator off and tried the 
same hill again.  Ran fine.  
I had put the regulator between the fuel filter and the carb.  This engine 
uses one of the split fuel filters that has a return line to the tank, so I 
thought maybe that was the problem.  I switched things around and put the 
regulator before the fuel filter.  Same problem.  Took the regulator back off 
and runs fine.  
Any ideas?  Did I just waste $30 on this regulator?
Thanks,
Todd
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
 Back to the Home of the AMC Gremlin
 Back to the Home of the AMC Gremlin