 
[Amc-list] Muskeeter rings,,, Ring break-in problems
     
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Amc-list] Muskeeter rings,,, Ring break-in problems
- From: Brien Tourville <hh7x@xxxxxxxxxxxxx>
- Date: Sun, 19 Oct 2008 04:06:39 -0400
Subject: Re: [Amc-list] Muskeeter rings,,, Ring break-in problems
To: "AMC/Rambler owners, drivers and fans." 
	
Thanks!
I'll be filing this.
Uh, anti friction lube? Would you use this on a the Coated Skirt piston?
So, Basically your saying you don't get assembly lube anywhere near the rings and use 3 in 1 oil in the ring grooves and let the rings pretty much dry?
   Call me old and unschooled on this, but I always used plain old engine oil and pretty much lubed the crap out of the bores and pistons with it. I take it I was doing it wrong?
  
   I never had a rebuild fail on me over the years though! No smokers or other failures. So I must not have screwed up too bad...
--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
2004 Grand Cherokee Laredo, 4.7L, Quadratrac II
" I realize that death is inevitable.
I just don't want to be around when it happens! "
--
That's correct, except the last part..
Carefully lube the ring lands so they don't
abraise on start up - keep all oils off the rings
faces.
Run just a daub of light oil centered on the piston skirts to ease initial dry start up skuffing.
The dry fresh cross hatched walls are not to be oiled either - unless you're storing the engine long term.
 
If done correctly the dry rings will generate crazy heat against the dry crosshatch & seat properly almost instantly.
Keep the engine in an effortless sweet spot above 2k rpm for 
two minutes - not revv'ems - just floating around 2,300.
The old air cooled VW & PORSCHE flat fours had a reputation
for smoking - back in the 1960s.  
VW / PORSCHE AG drew info from the racing community & instituted the above procedures at the Factory and for Service.
No more smoking D'ubs - problem solved.
A guesstimate would be that back when, American engine piston weights & ring design / materials worked in favor of achieving
a ring sealing - even after a 'wet storage' rebuild .
T
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
 Back to the Home of the AMC Gremlin
 Back to the Home of the AMC Gremlin