Re: [Amc-list] 327 Starter Removal

["Daniel G. Ritzinger" <danritz@xxxxxxxxxxx>]

I ran into the same issue when I was ready to install a new mini-starter in 
my '69 Javelin with Hedman headers.  Here's how I worked out the removal of 
the old (stock) starter:

http://www249.pair.com/danritz/jav/starter1.jpg

http://www249.pair.com/danritz/jav/starter2.jpg

The mini-starter went in easily with headers in place.  I assume in your 
case you'll need to get a stock starter back in, so that will be a problem 
also?

Dan

----- Original Message ----- 
From: "KENT ANDERSON" <65marlin327@xxxxxxxxxxx>
To: <amc-list@xxxxxxxxxxxx>
Sent: Thursday, September 11, 2008 4:42 PM
Subject: [Amc-list] 327 Starter Removal


> Stuck!  How do you remove the starter from a '65 327 without removing the 
> exhaust manifold?  Did AMC really not think about removing that part when 
> it wears out?  Granted, the thing has lasted over 100K, and 43 years, but 
> that's a bit extreme, I think.
>
> ANY suggestions?
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> http://splatter.wps.com/pipermail/amc-list/attachments/20080911/aa6dbd88/attachment.htm
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
> 

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list