Re: Drum Vs Disc... (a rant)
     
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Drum Vs Disc... (a rant)
- From: Matt Haas <mhaas@xxxxxxx>
 
- Date: Thu, 11 Aug 2005 07:51:35 -0400
 
<snip>
> 3) Even on the first brake pad replacement, the rotors are ALWAYS:
>       a) too warped to be resurfaced
>       -or-
>       b) too thin to be resurfaced
>
>               ...and therefore cost $150+ per wheel.
>
> 4) Cost (per pair): Pads-$20    Resurface-$0 (See #3)  New
> Rotors-$300   New tool to remove calipers-$25
>       TOTAL-$345
rotors arent that expensive for all vehicles. For my Eagle I can get 
rotors for $25 each and pads for $15 per set.
No new tools required. Rotors $50, pads $15. I do the work myself so $65 
in parts. I can even throw in new calipers for $17 each so add another $34 
to that and I am still not over $100.
The only problem I had on the f-150 is, because of it being a 4 wheel 
drive, we did need a special tool to take the hub apart. We did have to 
replace one rotor cause my boss didn't check it out when it started having 
problems so by the time I finally insisted on checking it the rotor was 
ground down too bad to be resurfaced. Pads for that were $30 because he 
got the "heavy duty" ones, rotor was $20. Calipers would have been $20 
each. So if we had replaced both rotors and the calipers it would have 
been $30 for pads, $40 for rotors and $40 for calipers for a grand total 
of $110.
<snip>
If you want longer pad life, get better pads. I've been using Performance 
Friction carbon metallic pads for quite a while and they last a long time 
(I got over 70,000 miles on the set I put on my 96 Ram). They also are 
easier on the rotors and stop better (they get even better with a little 
heat). Factory brake pads stink on most cars anymore and even the cheap 
replacement ones are usually better.
When I did the brakes on my american (drums). I had to replace both front 
drums and one rear drum at a cost of $40 each, all 4 wheel cylinders at a 
cost of $25 each, springs (hold down kits) at a cost of $14 per side and 
self adjuster kits at $15 per axle and brake shoes at $12 per axle. so we 
have drums $120, wheel cylinders $100, springs $28, adjusters $30, brake 
shoes $24 for a total of $302. So if I had replaced that 4th drum I would 
have been at $342 making the total price $171 per axle. Almost 2 times the 
cost of disc brakes on my eagle or my boss' ford. On the other hand, those 
drum brakes should last a while. Not long after doing all of the brakes my 
master cylinder went out. I bought a new one for $14 and then paid another 
$10 for fittings to make it work so I am into my american for $325 on 
brakes. The only things that haven't been replaced is one drum and the lines.
<snip>
Where did you get drums for $40?
Matt
mhaas@xxxxxxx
Cincinnati, OH
http://www.mattsoldcars.com
1967 Rambler American wagon
1968 Rambler American sedan
===============================================================
According to a February survey of Internet holdouts released by
UCLA's Center for Communication Policy, people cite
not having a computer as the No. 1 reason they won't go online.
 Back to the Home of the AMC Gremlin