Re: HO Exhaust Manifold in the Eagle -

["Jim Blair" <carnuck@xxxxxxxxxxx>]

A: Not so much a change in the Jeep, but something the Eagle wasn't designed 
to be without (the front axle hanger) Jeep also has 4 link suspension and 
not IFS hung from the motor.


From: "Brien Tourville" <hh7x@xxxxxxxxxxx>
To: mail@xxxxxxxxxxxx
Date: Wed, 05 Jan 2005 02:47:25 -0500
Subject: HO Exhaust Manifold in the Eagle -
Message-ID: <41DB553D.18090.361F188@localhost>



From:           "mail@xxxxxxxxxxxx" <List@xxxxxxxxxxxx>
To:             "hh7x@xxxxxxxxxxx" <hh7x@xxxxxxxxxxx>
Subject:        mail Digest for 4 Jan 2005 in hour 15:00
Date sent:      Tue, 4 Jan 2005 15:17:15 -0800
Send reply to:  mail-From-<# print("<#"); #> print(JADDR); <# print("#>"); 
#>@amc-list.com

got the
manifold and downpipe from was 2wd so the downpipe don't fit
because of
the front driveshart.
 Now  I'm GUESSING the 4wd Cherokee has a C bend in the downpipe for
the front drive shaft like my Eagle. It APPEARS that if this is so, I
could use one of these IF I had it cut so the Eagle flange could be
welded on it for the Cat seeing as this is also used as a very solid
front support for the exhaust system.
 Anyone see any flaws in this plan.


========================


What did they do to the '91 and up Cherokee that
allows them the different Header from the '87-'90 ?

-or- was it just that a 'fluke' allowd the Renix exhaust
manifold to fit the Eagle - and the '91+ HO
Exhaust manifold is no go - unless you ditch the
front driveshaft ?

             Brien.
         NEW YORK
   eagle registry #501

eagle kammback registry