Re: [AMC-list] AMC-list Digest, Vol 67, Issue 10

[Clarence Milstead <cmilstead@xxxxxxxxxxxxxxxx>]

On 10/12/2014 2:00 PM, amc-list-request@xxxxxxxxxxxxxxxxx wrote:
> Send AMC-list mailing list submissions to
> 	amc-list@xxxxxxxxxxxxxxxxx
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
> or, via email, send a message with subject or body 'help' to
> 	amc-list-request@xxxxxxxxxxxxxxxxx
>
> You can reach the person managing the list at
> 	amc-list-owner@xxxxxxxxxxxxxxxxx
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of AMC-list digest..."
>
>
> Today's Topics:
>
>     1. Re: Engine prep before startup (Chuck Noll)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 11 Oct 2014 18:52:05 -0700
> From: Chuck Noll <cnoll99@xxxxxxx>
> To: amc-list@xxxxxxxxxxxxxxxxx
> Subject: Re: [AMC-list] Engine prep before startup
> Message-ID: <BLU437-SMTP89E47AF217132B090DF883A7AF0@xxxxxxx>
> Content-Type: text/plain; charset="windows-1252"; format=flowed
>
> On 10/11/14 12:02 PM, amc-list-request@xxxxxxxxxxxxxxxxx wrote:
> > Re: [AMC-list] Engine prep before startup
> Thanks for the advise guys I will follow it. I also seem to recall that
> you can remove the distributor and use a flat blade in a drill to spin
> the oil pump to get oil into the engine without cranking it over. Am I
> wrong about this? Is it a good idea or a bad one? First I have to
> replace the wire harness before I can do anything. I have heard some say
> that is fairly easy and others say it is not. We shall see.
> Chuck
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
>
>
> ------------------------------
>
> End of AMC-list Digest, Vol 67, Issue 10
> ****************************************
That's a good idea, I've done it many times, on the AMC 6 cyl I check 
and see if the valves are being oiled, if they are getting oil I expect 
everything else is getting oil also. I usually let the drill motor fun 
for a while and pump lots of oil.
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com