Re: [AMC-list] Converting to a GM HEI 6 Distributor

[Jim Blair <carnuck@xxxxxxxxxxx>]

It just cost me $60 to my door for a Skip White HEI dist with AMC gear already on it, cap, coil and module complete. Just needs a power wire and plug wires. With points systems, I switch to a Napa coil IC12 which is about double the spark of the stock points coil. Open the gap on the plugs slightly (I run NGK BKR6EK plugs to kill ping so I can advance timing more and no EGR) and it's good to go plain simple. Just run a good brass tower cap.


From: Ken Ames 
To: "Rambler AMC, Nash, Jeep and family" 
Subject: Re: [AMC-list] Converting to a GM HEI 6 Distributor
Message-ID:
	
Content-Type: text/plain; charset=utf-8
 
I use the regular cylindrical stock-looking high output coil, usually from the same
vehicle that supplied the cap-rotor-wires, not TFI. 
 
Ken 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20141010/f46f06de/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com