Re: [AMC-list] Gremlin

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: Bill Ryan <williamryan910@xxxxxxxxx>
" 
" Can't wait until warmer weather so I can work on my 1971 gremlin got a
" question I have a 258 six with four bbl carb cam and header it's mated
" to a ford four speed and 8-8 rear I want to find out what type of
" clutch set up can I use
" thank you Harold Ryan

i'm assuming you have a later engine in that car, and that you used a
late-'70s t150 setup to put the toploader in; that 3sp is also a
toploader.

your clutch options are pretty wide open.  your flywheel should be
drilled for a 10" - 10.5" pressure plate; the tranny will have a
1 1/16" x 10 spline input.  just about anything you might like is
available.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com