Re: [AMC-list] A little activity on the list

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" 
" -----Original Message-----
" From: Joe Fulton <piper_pa20@xxxxxxxxxxx>
" 
" 
" []
" I have a fresh 232
" and was going to put a t-150 with Laycock overdrive in it but I discovered
" that it already has a 2.73 rear end so an overdrive would not be practical I
" think.  If I could finda a 3.08 AMC 15 rear or the next lower ratio I might
" reconsider the overdrive.  But for now I'll keep it simple and reinstall the
" T-14.

i have to ask, why the t150+o/d?  unless your gremmie is a column
shift and/or you happen to have it...

the 3+o/d from a late '70s [pre fox-chassis] granada would be a
straight swap for a 'normal' t150, but being really a 4sp it needs a
floor shifter.  this version still has an iron case and a 'normal'
input shaft, like the t150; the aluminum-cased srod versions have
internal linkage [the 'sr' part] and, for no good reason i know of, an
input longer than the t150 and all the other ford toploaders.

not original, but simpler and more rugged/reliable than the laycock
setup, and an easy fit - if you want a floor shifter.

" What will you fellow listers be doing this weekend (bad keyboard, no
" question mark).

checking my snowed-in vermont aunt's summer place [nearby], and
digging myself out from the latest storm - 3-6" of heavy wet snow.  i
don't want it to freeze solid before i dig out.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com