Re: [AMC-list] AMC-20 Steer axle ?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [AMC-list] AMC-20 Steer axle ?
- From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)
- Date: Mon, 4 Jun 2012 15:48:50 -0400 (EDT)
" From: amcngmc@xxxxxxxxx
"
" Just watched a show where they made a Dana 80 rear into a D80 front
" axle. They said this can be done to about any axle.
"
" Now its got me thinking could this be done to an AMC-20 ? ! ? Than it
" got me to take it one step further ;-)
"
" The humvee's had AM-20 center sections front and rear but were
" reverse driven as they also had gear reduction hubs . . . Ok now to
" see where I am going with this :-)
"
" 83 Eagle SX/4 with both AMC-20 front and rear axles ! ? ! ? ! Could
" it be done ? ! ? ! ?
the eagle d30 front diff has a custom housing that bolts to lugs added
to the 258's block. 4-cyl eagles had a bracket instead, but the amc20
is likely wider and you could run into halfshaft length and angle
issues.
otoh an amc20 rear is easy, with some luck: the hd axle in early
[roughly pre-chrysler] xjs was an amc20, the same width as eagles. i
don't recall if you'd have to play with perches [sua vs. soa], but
iirc it does have staggered shocks where the eagle doesn't.
________________________________________________________________________
Andrew Hay the genius nature
internet rambler is to see what all have seen
adh@xxxxxxxxxxxxxxxxx and think what none thought
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
Back to the Home of the AMC Gremlin