[AMC-list] Fw: AMC 4speed conversion transmssion Help wanted

["Eddie Stakes" <eddiestakes@xxxxxxxxxxxxxxxxxxxx>]

Ken below is switching from a 3 speed to a 4 speed and seems to have some of the items already for conversion, but is also running into some issues. Feel free to comment & coach him thru this conversion, be sure to also copy your reply to him & thanks in advance to all who might reply.
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com


----- Original Message ----- 
From: Ken Hetchler     khetchler@xxxxxxxxxxx


  Hello Eddie,

 I was wondering if you could help me out with some of your great AMC knowledge. I would like to put a four speed transmission in my 1972 javelin and was wondering if you could tell me what parts I may need to locate before I start this project. My car currently has a three speed in it that seems to have a shake at any speed over about 30mph. I have purchased a T-10 with the numbers t10p-1b on the body and t10p-7a on the tail shaft, I also have a Bell housing that reads 3179072. The bell mounts to the trans fine, but when I try to couple to the motor (360) the through out bearing will not reach the pressure plate. I'm not sure what I need to remedy this or if I am even headed the right direction for this transplant. Anyway any insight you may have for me would be appreciated so much.

Thanks 
Ken 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20120328/c1cf8613/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com