[AMC-list] Gremlin with Overdrive Question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[AMC-list] Gremlin with Overdrive Question
- From: Joe Fulton <piper_pa20@xxxxxxxxxxx>
- Date: Thu, 10 Feb 2011 20:02:14 -0800 (PST)
I asked this same question on the AMC forum so pardon the repeat if you monitor
both sites. I'd appreciate any information folks can offer though.
I am a few weeks away from installing this but I thought I would ask the
question. I have an NOS 150T three speed tranny with OD. My Gremlin (76) had
a T-14 in it. I both trannies but I have not measured or compared the locations
for the tranny crossbrace and mount and I'm wondering if the OD actually takes a
special mount. I'll check Rockauto listings tonight, but thought I'd ask the
question.
Another issue. I have an NOS overdrive switch with turn signal stalk. What I
don't have is the wiring harness for the overdrive. I can fabricate a harness
from the wiring diagram in the TSM but I'm concerned about the cutout switch on
the throttle linkage. What did AMC use there? What is a good generic switch
to use?
Has anyone done this or does anyone have an 70s AMC with overdrive they can
photograph?
Joe Fulton
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
Back to the Home of the AMC Gremlin