[AMC-list] Pacer V8 factory tach & clutch pedal setup wanted
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[AMC-list] Pacer V8 factory tach & clutch pedal setup wanted



Not mine but Sam is looking for a V8 Pacer tachometer & a clutch/brake pedal setup for same; I don't know if this setup interchanges with Gremlin & Hornet, either way, if someone can help him out, please feel free to comment, and copy your reply to Sam who would appreciate it, thanks in advance to all who might reply.
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com

----- Original Message ----- 
From: Sam Mcpeak 
To: Eddie Stakes 
Sent: Sunday, January 16, 2011 9:16 PM
Subject: Re: 1978 amc pacer factory tach


Thanks Eddie
i purchased a nice 1978 pacer wagon 
with a 304 in it, the car has 48000 miles 
on it. im looking for a clutch pedal system
to change it over to a 5 speed.
or if i can find a amc turbo 400 that would 
 work  also..

let me know if you can help me .
please email me anytime ..

 SAM  




--------------------------------------------------------------------------------
From: Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
To: Sam Mcpeak <n5pay@xxxxxxxxx>
Sent: Sun, January 16, 2011 8:27:12 PM
Subject: Re: 1978 amc pacer factory tach


Hi Sam, those were about $150 new and I have only had 2 in stock in 27 years a vendor. I had a 6 Pacer tach on my watch list on ebay a few weeks ago though, it sold for about $120. They are uber rare as not very many people opted for them. I saw a NOS one sell for $400 at a AMC national meet first day they put it out on table. Used usually command 1/2 that but only if ever seen. And unfortunately with something as rare as that, only place you wil find one is ebay or maybe big national AMC event. 

Those were used from 76-79 if I recall. It's a small vertical thing, but again, not whole lot of Pacer V8s made and on top of that, not lot of folks opted for a tach. Sort of like a ski rack, not many people wanted one of those either. 

I don't know of any other verticle tach that would fit in that clock/tach Pacer hole either. Take care & good luck, 
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com

  ----- Original Message ----- 
  From: Sam Mcpeak 
  To: eddiestakes@xxxxxxxxxxxxxxxxxxxx 
  Sent: Sunday, January 16, 2011 8:14 PM
  Subject: 1978 amc pacer factory tach


  Howdy Eddie .
  This is Sam in Tempe Tx

  Im looking for a factory tach for a 
  1978 amc v-8 pacer if you have one
  or know where i can get one let me know.
   THX  SAM


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20110116/45e5e0c1/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated