I think I have too much oil going to the head on my 195.6, which is causing the rocker cover gasket to leak. I plumbed a separate line to the head from the oil gallery in the block. There's an old discussion (which I think Frank S. contributed to) on the AMC Forum about this problem. Evidently the engine was designed to have a Tee fitting off of the oil line to the filter instead of a separate line to the head. I'll put an partial obstruction (or orifice of some sort) in the line to partially restrict the flow of oil to the head. Joe Fulton _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com