[AMC-list] Parts and projects for sale

[Jim Blair <carnuck@xxxxxxxxxxx>]

Going through my stuff as I am planning a possible move soon. 
NP208 D (from a Dodge, but will also work with an FSJ 727 23 spline to use RH drop front axle instead of '80 up LH drop that Jeep NP208 AM used.  $100. Needs a rear yoke. 

NP208 F from an '84 Bronco full size. 31 spline (also used in '80 up FSJs with T18a trans) $100 complete 

NP208 C from an '8? Chev with 700R4 for parts (bad chain). I was going to swap the input gear (27spline) to a Jeep NP tcase so I could swap in an O/D. $35 (can disassemble if you only need some internal pieces)

Two 727 trans for parts. 

 One is 4x4, but only for parts. It was towed in first gear, low range till the governor gave up. Can dismantle as I may need some internal pieces for the one I'm building. 

The other is 2wd, but fixed yoke output like a tcase. It was run with water in it, so it's parts only $50 obo complete except dipstick. 

AMC Eagle rear axle (D35 aka Model 15) needing pinion bearing and seal and I assume matching front axle D30 ifs, $200 the pair with low gearing (rear is currently in my Spirit, and is so low geared that I couldn't do 70 with my boot to the boards) I'm guessing 3.73 or 4.10 ratio. 

Model 15 rear axle for '82 Spirit with highway gears and near new brakes and 9" drums $100

Model 20 rear from '77 AMX. Unsure to gears. $100

In a couple months I'll have the 360/T18a/NP208 from my '82 Honcho out to sell. $500 the set. 

AX5/NP207 from Jeep XJ/MJ 4 cyl $150 (external slave)

'87 Jeep Comanche lifted 5.5", 33/9.50/15 tires, 4.0L with AW4 ('90 wiring harness & converted to 4x4) $2000 as an almost done project. 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20101210/cac3b9d5/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com