Re: [AMC-list] Pushing a C-clip
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [AMC-list] Pushing a C-clip
- From: Joe Fulton <piper_pa20@xxxxxxxxxxx>
- Date: Thu, 14 Oct 2010 12:48:22 -0700 (PDT)
Thanks George. I may just look in the air chisel bit department at Home Depot. LOL
Regards,
Joe Fulton
--- On Thu, 10/14/10, George Graham <Jensenguy@xxxxxxxxxxxxx> wrote:
From: George Graham <Jensenguy@xxxxxxxxxxxxx>
Subject: Re: [AMC-list] Pushing a C-clip
To: "'AMC, Rambler, Nash, Jeep and family'" <amc-list@xxxxxxxxxxxx>
Date: Thursday, October 14, 2010, 12:35 PM
I have an old air chisel bit (had it since about 1970) that was made for
walking control arm bushings out of the arms -- and it also works great for
pushing C-clips. Its flat and blunt on the end, shaped like a half-moon,
and you can beat on it without damage. Where to find one of those in this
day and age I don't know.
George Graham
AMC of Houston
-----Original Message-----
From: Frank Swygert [mailto:farna@xxxxxxx]
Sent: Thursday, October 14, 2010 10:03 AM
To: amc-list@xxxxxxxxxxxx
Subject: Re: [AMC-list] Pushing a C-clip
I'm afraid "big screwdriver" is what I use too. A small hammer to tap it
home is a good idea. I didn't get the C-clip seated well once and lost a
cap -- not good!! So go around it at a couple places and tap it home.
I've got an old carpenter's screwdriver that is stout but short that
works perfectly.
--------------
Date: Wed, 13 Oct 2010 18:58:59 -0700 (PDT)
From: Joe Fulton <piper_pa20@xxxxxxxxxxx>
I'm trying to get the rear u-joint back in the Rambler and pushing the
internal c-clips onto the u-joint caps is proving to be a hassle while
lying under the car with the u-joint hanging loose.? I know I'll get it
eventually but just wondered if anyone who has done this before has a
suggestion for a pusher tool other than the big screwdriver I'm using.?
I did the same thing on my 66 Rambler years ago and I forgot if I just
kept trying with a screwdriver or if I got a brainstorm involving some
other tool.? I thought maybe I'd get out Mr. Dremel and carve an arc in
a heavy putty knife.
?
--
Frank Swygert
Publisher, "American Motors Cars"
Magazine (AMC)
For all AMC enthusiasts
http://www.amc-mag.com
(free download available!)
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20101014/31c2e85b/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
Back to the Home of the AMC Gremlin