It comes down to just which Ford wheels you're going to use - whether they use the hub to centre the wheel, or have a larger hub hole and use the lug nuts to centre the wheel. Some may not actually touch the hub at all. Ken Quoting russ hathaway <russh97309@xxxxxxxxx>: > I am not sure what year or application these wheels came from, but when I > picked them I took an old AMC hub, the bare one that I take to all swap > meets, and went through a stack of steel wheels looking for 4 to mount snow > tires. The four matching ones say Fomoco by the stem, the hub fit with no > binding and it was 4 1/2 inch. The back spacing was a little reverse, but it > fit without hitting the fender as the snow tires are only 205-78. > The Bronco 2 wheels fit like a glove on my Pacer, they were 15x6 and look > good on the car. > I remember seeing a Matador or Ambo, can't remeber which one, on CL with > stock Ford mags. They stated that the original wheels and caps were in the > trunk. > I look for Ford wheels as an alternative when going 15inch on my AMCs if I > can't find any Chryco 15s. Toyota 2x4 also fits but the back spacing is real > reversed. I bought a Humpster that had a set of those and couldn't figure > what they were till I talked to my tuner neighbor.........Russ > > > > > _______________________________________________ > AMC-list mailing list > AMC-list@xxxxxxxxxxxx > http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com > _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com