" From: Jim Blair <carnuck@xxxxxxxxxxx> " " " The OHC motor is the 2.0L the audi, and only used '77-8 or so, sold back to power the porsche 924. " and the GM 2.5 is a pushrod. The GM motor is still a slight enigma. " Some came with SBC bell pattern and some came with 60 degree pattern. " I wouldn't mind knowing for sure because a lot of Jeep guys are " looking for the 904 with SBC pattern to do motor swaps on CJs. (I saw " 3 at a swap meet several years ago or I would have thought they were " not real) i was under the impression that all amc/jeep iron dukes were the older sbc rwd style. afaik gm redid the blocks to 60-deg and fwd about the time amc dropped them, '83-4. they also redid the buick 231 about that time. dunno how many amcs or jeeps would've gotten the 4 and auto, but they'd all be 904s, and sbc pattern in the iron duke years. rather a light tranny for a 350... did mopar ever use the 904 in an older 4x4, with dana 18 or 20 t/c? i know they offered slant sixes in 4x4s, even 3/4t. ________________________________________________________________________ Andrew Hay the genius nature internet rambler is to see what all have seen adh@xxxxxxxxxxxxxxxxx and think what none thought _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com