Re: [AMC-list] [AKO Warning - Message fails DKIM verification] wacky wre
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [AMC-list] [AKO Warning - Message fails DKIM verification] wacky wrench needed -- BOX END 12 point crow's foot 1/2" drive
- From: "Daigle, Marcus P SSG MIL USA FORSCOM" <drcool.daigle@xxxxxxxxxxx>
- Date: Sat, 19 Jun 2010 14:22:08 +0300
The 1/2 12 pt crowfoot wrench do exist.. they are line wrneches. I've used some in the military, can't remeber if they were K&N or snapon or some other tool brand. Check out each tool mfg website, there should be listings for line wrenches.. I think craftsman might have the line wrenches in the "proffesional" series.
Marcus
----- Original Message -----
From: tom jennings <tomj@xxxxxxx>
Date: Saturday, June 19, 2010 9:08
Subject: [AKO Warning - Message fails DKIM verification] [AMC-list] wacky wrench needed -- BOX END 12 point crow's foot 1/2" drive
To: "AMC/Rambler owners, drivers and fans." <amc-list@xxxxxxxxxxxx>
> I think this tool might not even exist -- the two end nuts on the
> ARP studs
> won't accept a socket with the rocker shaft installed. I've been
> torquingit by using a box end wrench and extention to rotate the
> nut the same number
> of degrees as the others turned with the torque wrench; luckily
> they all
> turn the exact same amount.
>
> What I need is a crows foot wrench, but it's got to be a 12-point
> box end,
> 1/2" nut and 1/2" drive. I've never seen a box end crow's foot
> (I've seen
> pics of some "impact wrench" crow's foot that are 270 degrees,
> like a tubing
> wrench).
>
> Do they even exist? Can anyone think of a better solution?
>
> I'm thinking that maybe I should buy a 1/2" "impact socket" and
> weld a 1/2"
> drive socket to the side of it. I'm not worried about the torque
> error,it'll be small as the effective lever length will be about
> one inch, and if
> I torque 90 degrees off it's axis it won't matter much.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100618/2ce57a00/attachment.htm>
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
Back to the Home of the AMC Gremlin