Re: [AMC-list] 360 pistons

[Greg Taylor <amundaza@xxxxxxxxx>]

Bruce,
Would it be of benefit to send him a STD bore 1970 high-compression 360 piston, as opposed to a low-compression dished piston?

Or ... could you (or should you) instead send a 343 flat-top piston (which can be built in a 360)?

Food for thought ...
 
Sincerely, 
Greg Taylor 
Rochester Hills, MI
1989 Jeep Grand Wagoneer "TRMN8R2"
330-CID AMC Stroker V8




________________________________
From: Bruce Hevner <scramblr@xxxxxxxxxxx>
To: amc-list@xxxxxxxxxxxx
Sent: Tue, March 2, 2010 12:22:44 PM
Subject: [AMC-list] 360 pistons

OK the mfgr SEEMS interested in looking at the POSSIBILITY of making some
hyper 360 pistons!! They want a std bore sample and the specs that are to be
changed. Trouble is I don't have any std bore 360 pistons lying around. Does
anyone on the list have an old (in relatively good condition) 360 std bore
piston they could donate to the cause?? If so email me off list and I'll let
you know where to send it. I have sent him pictures of the TRW forged 360
pistons I'm going to put on ebay but he also wants a sample.

But HEY,,, that's just ME!

Bruce Hevner

one_aceracer@xxxxxxxxx

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100302/ad11960e/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100302/591bcef0/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com