Re: [AMC-list] Howdja pull off the door panels?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [AMC-list] Howdja pull off the door panels?
- From: Ken Ames <ameskg@xxxxxxxxx>
- Date: Sun, 21 Feb 2010 17:15:33 -0700
There are 3 spring clips on the front and rear edges that have to be pried out.
I've used just a large screwdriver with success. I think you're best to be as
close to the bottom of each clip to avoid popping the panel off the clip.
4 screws along the bottom, and with the handles undone, it should lift up to
unhook the top from the door and be off. : )
(I'm assuming 70s-80s G-H-S-C-E car here.)
Ken
Quoting Bruce Griffis <bruce.griffis@xxxxxxxxx>:
> While running around yesterday, I noticed that it was getting harder
> to roll up the driver's side window. I also have not locked the doors
> (front or rear) since the door locks are stiff. So - I guess I need to
> take off the window cranks, the door handles (inside) and the
> armrests. Reading the TSM, it says to gently pry off the panel with a
> special took. Is there any trick to it? Do I need something specific,
> or can I just wander over to the auto parts store and pick up
> something? My door panels have chrome trim on the top and bottom -
> does that come off seperately? Or stay with the panel? Just spritz
> everything inside with silicone (or?).
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
Back to the Home of the AMC Gremlin