On Mon, Jan 25, 2010 at 06:58, Sandwich Maker <adh@xxxxxxxxxxxxxxxxx> wrote: > > top cover or side cover? the t85 and t89 are side cover - like the > t10 which evolved from them - but the lighter t86 has a 6-bolt top > cover, and was a h/d opt over the t96 before the t14 in '68. also, > the t86 has an almost-square bolt pattern like [but not the same as] > the t96, but the t85/t89 has a tall pattern with one lower hole kicked > out, shared i think with the t10. btw the top bolts are shared with > the t86. > > Now THAT crap I know about. If the bearing retainer is the right size (if it's from an AMC it will be) and if the two top holes line up, that's 95% fine, I don't care if the lower two holes are in Texas. I can fab lower mounts. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100125/e85bf1e2/attachment.htm> _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com