Yar, that would work :) What was the largest V6 GM put a progressive on? I know the 2.8 got one in the 80's. Sent from my BlackBerry® wireless device from U.S. Cellular -----Original Message----- From: Ken Ames <ameskg@xxxxxxxxx> Date: Wed, 11 Nov 2009 12:24:16 To: AMC, Rambler, Nash, Jeep and family<amc-list@xxxxxxxxxxxx> Subject: Re: [AMC-list] AMC-list Digest, Vol 8, Issue 22 IIRC carburated Nissans 4 cylinders had a 2 barrell progressive. Put 3 on for a tri-power setup. : 0 Ken Quoting "(Sandwich Maker)" <adh@xxxxxxxxxxxxxxxxx>: > " From: tom jennings <tomj@xxxxxxx> > " > " On Tue, Nov 10, 2009 at 21:36, Marc Montoni <Freedom@xxxxxxxx> wrote: > " > " > " > . Does anyone know of a two-stage 2-bbl carb that would be a bolt-on on > a > " > 2bbl AMC six cylinder manifold? > " > " > " Ayup! > " > " Weber 32/36 DGEV and adapter to fit a BBD base. There's a jeep kit that > " drops right onto the 81-up manifold. > > there's a rochester that might fit also. iirc it's used on 2.8s so > it's probably a little small. > ________________________________________________________________________ > Andrew Hay the genius nature > internet rambler is to see what all have seen > adh@xxxxxxxxxxxxxxxxx and think what none thought > _______________________________________________ > AMC-list mailing list > AMC-list@xxxxxxxxxxxx > http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com > _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com