Yeah what Mark said, prothane. There's a place in Phoenix that sells urethane bushings. If you read the information below, supplied by Mr. John Elle, regarding that pesky lower coil spring mount on the 70 AMC front end, you will even have that repaired so that it is better than new. The following information will cover the boots or dust covers: Tie Rod End dust covers or boots. Use to replace stock ones on installation. 13001 Sold in a package of four. Ball Joint Dust Covers or Boots. Use to replace stock ones on installation. 13009 Lower Front Spring Saddle Spindle rubber. Use to rebuild front spring saddle. Purchase, ENE2048G. Use two per side. Disassemble spindle mechanism. Clean out rubber and reassemble using these "Spring" Bushings. Purchase a total of 4 Performance Suspension 3001 N. 35th Ave Phoenix Arizona Phone 602-272-4085 Hope this helps, Armand ----- Original Message ----- From: <feltonjk@xxxxxxx> To: <amc-list@xxxxxxxxxxxx> Sent: Wednesday, October 14, 2009 4:09 PM Subject: [AMC-list] Front end > > Any suggestions on polyurethane front end bushing kit for 70 AMX? > > Jim > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/200910 14/7e04c3c4/attachment.htm> > _______________________________________________ > AMC-list mailing list > AMC-list@xxxxxxxxxxxx > http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com > > > -- > Internal Virus Database is out-of-date. > Checked by AVG. > Version: 7.5.560 / Virus Database: 270.12.26/2116 - Release Date: 5/15/09 6:16 AM > > _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com