[AMC-list] AW4 question

[Doug Dornbos <dornbos@xxxxxxxxxxx>]

Hi all

I am working on a junkyard AW4 (RWD) transmission pulled from a 1994 
Cherokee. I have several questions:

1. what should I do with this before I put it in my vehicle? tonight 
I'll put it on my engine stand so it will be real easy to work on 
compared to being under a vehicle. are there things I should be doing at 
this point that will be difficult to do later? I've never messed with 
transmissions before other than change the fluid. I am planning on 
putting this in a 1973 4-dr. Matador without any electronics and my plan 
is to manually shift it with a switch.

2. the trans leaked fluid both out of the front and the back when I 
tilted it one way or the other. is that normal or should some seals be 
replaced? I'm open to any recommendation here which you might give.

3. the fluid that leaked out looked nasty. brown .... no red left. 
that's not a good sign AFAIK. is there any way to tell if the trans is 
actually any good before I go through the effort of putting it in the 
vehicle?

4. if you can steer me to a website that I should be looking at for this 
 project, please let me know.

5. I am looking for a yoke for this .... if anyone has one they want to 
sell, let me know.

6. I haven't had this mocked up in the Matador yet so I have no idea how 
much modification the mount is going to need. If you have experience to 
share in that area, I'd be interested.

thanks
Doug
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com