Re: [AMC-list] MOTOR WENT BYE BYE!!!!

[das24rules@xxxxxxxxx]

got the oil pan dropped tonight and rods pulled, and pistons popped out. rings
looked good. crank looked good, and rods looked good. #6 rod bearing is almost
completely GONE. very little left. not spun, just worn. wierd. none of the
rods were loose either. real wierd think is, i had pulled the rod caps off
and checked the bearings and crank. everything looked like new. now, all the
bearings look worn pretty bad. all down to the copper or what ever the base
material is. got to clean out the bottom of the oil pan as it has a fair
amount of bearing junk in it. 

anyone else ever have issues with the bearings after they checked them? a
little bit of emery cloth to the crank, and hone the cylinders and should be
good to go. 
dave stohler
www.picasaweb.google.com/das24rules
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com