are you sure it is the front seal on the trans and not the rear main seal on the engine? there is an inspection cover that covers the flywheel. pull it off and verify if it is front seal on trans or rear engine seal. if front seal, trans will need pulled. it is easy to change when trans is out. pull trans out of bellhousing. leave bell hooked to engine. front bearing cover will come off and you can change the seal. i am going by memory, but i beleive it was easy to do. been a while since i messed with one of them.someone with more knolege will probably chime in with more detail. dave stohler
www.picasaweb.google.com/das24rules _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com