Re: [Amc-list] 67 Ambassador pre-formed heater hose needed

[Joe Fulton <piper_pa20@xxxxxxxxxxx>]

I would suggest that you contact Harold Wenner (amcpartsloon on Ebay) and ask him if he has the factory hose.  He probably has access to the factory part number books.   I don't have his regular email address but someone else here on the list probably does.  Mr. Wenner is great to deal with and has many original parts to sell and his prices are fair.   I envy you your 67 AMBO convertible.  They are beautiful.

Joe Fulton  


--- On Fri, 2/13/09, Joe <jgray_55@xxxxxxxxx> wrote:

> From: Joe <jgray_55@xxxxxxxxx>
> Subject: [Amc-list] 67 Ambassador pre-formed heater hose needed
> To: amc-list@xxxxxxxxxxxx
> Cc: Jgray_55@xxxxxxxxx
> Date: Friday, February 13, 2009, 8:49 AM
> Hi guys. Anyone know of a part ##/brand of preformed heater
> hose that will work/can be adapted to work on my 67
> Ambassador? It goes from the heater water/temp  control
> valve on top of the heater housing (under the hood)down to
> the heater core tube. It has two 90 degree(roughly) bends in
> it. I located a L shaped hose at NAPA and got one of those
> spring/bend forming things. BUT i think that hose is going
> to be about 1 " too short after forming the bend. Any
> suggestions greatly appreciated!! I'm about ready to
> reassemble my 67 DPL convertible after finally getting
> it's body work completed/painted afteer six years of
> driving it looking like dodo!! thanks again,Joe
> 
> 
>       
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list