Re: [Amc-list] floorpans

[Wrambler242@xxxxxxxxxxx]

I know there are differences in the pans, just finding them wide enough with facotry stapings would have done it.
The repop AMX/Javelin pans fit the American line.
If someone had done the pans for the Machine I'd bet they would have the width and length to do the 63-66's.

Joe Fulton cut out a steof Hornet pans, but they too did not have enough width or length to work with :(

Actually the convert uses a narrower pan than the sedans and hardtops due to the extra channel laid in along the floor side of the inner rocker. The pans on the 65 are not too difficult, with a little patience I should be able to make up exact duplicates with just the bead roller.  I just need the ambition!

Been getting the run around from the local clinic again. They agreed to a trial of a neuro stimulator to block the pain signals. Now I can't seem to be able to get an actual appt to get the process started. Have to do Psych eval and if I pass that they will do a trial run with an external beltpack hooked to leads in my neck. sounds fun huh? I actually have a lot of hope this will work and I can toss the pain meds. Which I hate.

--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
2004 Grand Cherokee Laredo, 4.7L, Quadratrac II
" I realize that death is inevitable.
I just don't want to be around when it happens! "

 -------------- Original message ----------------------
From: "Jeff Reeves" <amcnut@xxxxxxxxxxxxx>
> Mark: the 67-78 floopans wouldn't have worked in the 65 anyway. You'd have 
> needed 63-66 floor pans.
> 
> The later big cars do show up around here occasionally, as do the earlier 
> models, but none of them are exactly plentiful around here.
> 
> Jeff Reeves
> Auburn, GA
> 94 Cherokee
> 81 Spirit GT
> 72 Javelin SST
> 
> > Message: 2
> > Date: Mon, 05 Jan 2009 17:04:07 +0000
> > From: Wrambler242@xxxxxxxxxxx
> > Subject: Re: [Amc-list] Rebel wagon floorboards
> > To: "AMC/Rambler owners, drivers and fans." <amc-list@xxxxxxxxxxxx>
> > Message-ID:
> > 
> <010520091704.11516.49623D870000F38000002CFC2216549976CDCBCD0A0C079D9F059D0E03@c
> omcast.net>
> >
> > Maybe not in Georgia!!!
> > I looked many times for ones from any big AMC to use in my 65 conv.
> > No dice.
> > I bought a bead roller to make my own.
> > Still hope to some day, maybe, maybe not...
> > --
> > Mark Price
> > Morgantown, WV
> > 1969 AMC Rambler, 4.0L, EFI, T-5
> > 2004 Grand Cherokee Laredo, 4.7L, Quadratrac II
> > " I realize that death is inevitable.
> > I just don't want to be around when it happens! "
> >
> >
> > ------------------------------
> >
> > _______________________________________________
> > Amc-list mailing list
> > Amc-list@xxxxxxxxxxxx
> > http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
> >
> >
> > End of Amc-list Digest, Vol 25, Issue 11
> > **************************************** 
> 
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list