You'd have to allow for that. If it proved insufficient by using two you could join the two curved pieces of tube with a third. -- Mark Price Morgantown, WV 1969 AMC Rambler, 4.0L, EFI, T-5 2004 Grand Cherokee Laredo, 4.7L, Quadratrac II " I realize that death is inevitable. I just don't want to be around when it happens! " -------------- Original message ---------------------- From: Ken Ames <ameskg@xxxxxxxxx> > I'd suspect that the 2 rubber connectors wouldn't have enough flex to allow > engine movement without tearing the inlet off the radiator. ? > > Ken > > > Quoting Wrambler242@xxxxxxxxxxx: > > > > > Looks like you'd need a tight radius mandrel bend and a uh non-tight radius > > mandrel bend. > > I'd get the tight swaged out to match the outled on the engine then line the > > two up to the perspective ends on the engine and radiatoer and cut and weld > > them together. > > Use two pieces of hose to connect them to the radiator and engine. Paint > > them engine color or black. > > > > Be a PIA, but looks doable. > > > > -- > > Mark Price > > Morgantown, WV > > 1969 AMC Rambler, 4.0L, EFI, T-5 > > 2004 Grand Cherokee Laredo, 4.7L, Quadratrac II > > " I realize that death is inevitable. > > I just don't want to be around when it happens! " > > > > -------------- Original message ---------------------- > > From: Joe Fulton <piper_pa20@xxxxxxxxxxx> > > > Here is the old flex radiator hose I wanted to replace. Note kink: > > > > > > > > > http://i118.photobucket.com/albums/o115/pacerman_01/rambler196ohv/auction11089.j > > > pg?t=1228279555 > > > > > > > > > Here is the new old stock hose I found on Ebay. It was listed for a 58-60 > > > > > Rambler and a 60 Classic. Works fine. I had to cut 1 inch off of the > > radiator > > > end of the hose. > > > > > > > > > http://i118.photobucket.com/albums/o115/pacerman_01/rambler196ohv/auction11090.j > > > pg?t=1228279663 > > > > > > As we have discussed on the list, molded hoses that fit are very hard to > > find. > > > I think I'm putting too much time and money into this old Rambler but I > > can't > > > stop myself from trying to improve it. I have so many other projects > > calling > > > though. > > > > > > Joe Fulton > > > > > > > > > _______________________________________________ > > > Amc-list mailing list > > > Amc-list@xxxxxxxxxxxx > > > http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list > > > > _______________________________________________ > > Amc-list mailing list > > Amc-list@xxxxxxxxxxxx > > http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list > > > > > _______________________________________________ > Amc-list mailing list > Amc-list@xxxxxxxxxxxx > http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list