Re: [Amc-list] Found A Hose 65 American OHV

[Wrambler242@xxxxxxxxxxx]

Looks like you'd need a tight radius mandrel bend and a uh non-tight radius mandrel bend.
I'd get the tight swaged out to match the outled on the engine then line the two up to the perspective ends on the engine and radiatoer and cut and weld them together.  
   Use two pieces of hose to connect them to the radiator and engine. Paint them engine color or black.

Be a PIA, but looks doable.

--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
2004 Grand Cherokee Laredo, 4.7L, Quadratrac II
" I realize that death is inevitable.
I just don't want to be around when it happens! "

 -------------- Original message ----------------------
From: Joe Fulton <piper_pa20@xxxxxxxxxxx>
> Here is the old flex radiator hose I wanted to replace. Note kink:
> 
> http://i118.photobucket.com/albums/o115/pacerman_01/rambler196ohv/auction11089.j
> pg?t=1228279555
> 
> 
> Here is the new old stock hose I found on Ebay.  It was listed for a 58-60 
> Rambler and a 60 Classic.  Works fine. I had to cut 1 inch off of the radiator 
> end of the hose.  
> 
> http://i118.photobucket.com/albums/o115/pacerman_01/rambler196ohv/auction11090.j
> pg?t=1228279663
> 
> As we have discussed on the list, molded hoses that fit are very hard to find.  
> I think I'm putting too much time and money into this old Rambler but I can't 
> stop myself from trying to improve it.  I have so many other projects calling 
> though.  
> 
> Joe Fulton
> 
> 
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list