nuther note, the copper spray works great on battery terminals if you don't mind the overspray and sticky factor! -- Mark Price Morgantown, WV 1969 AMC Rambler, 4.0L, EFI, T-5 2004 Grand Cherokee Laredo, 4.7L, Quadratrac II " I realize that death is inevitable. I just don't want to be around when it happens! " -------------- Original message ---------------------- From: "Bruce Griffis" <bruce.griffis@xxxxxxxxx> > Thanks! I called and ordered an intake gasket, head gasket and carb > base gasket - so will be good to go. I'll head out and look for the > brush-on or spray copper gasket sealer. At least it should be pretty > easy to disassemble! > > On Wed, Oct 22, 2008 at 1:52 PM, Joe Fulton <piper_pa20@xxxxxxxxxxx> wrote: > > Bruce, > > > > I use that copper gasket sealer which comes in a can with a little brush. it > is fairly easy to put on a light coat and smooth it out with the brush. Less > viscous than the stuff in a tube I would think, although I don't remember buying > it in a tube. > > > > I have an extra head gasket (just the gasket, not the whole head gasket set) I > think. I can drop it in the mail to you, but it might be easier for you to find > the whole set locally and you might ruin some of the other gaskets in the > process anyway. Let me know if you want it. > > > > Joe Fulton > > > _______________________________________________ > Amc-list mailing list > Amc-list@xxxxxxxxxxxx > http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list